Exercise Progression Plan for Postmenopausal Women: Bone Health Protocol
High-impact and high-intensity resistance training generate the high-magnitude mechanical strains needed to stimulate an osteogenic response at clinically relevant sites — the femoral neck and lumbar spine. This progression plan takes a patient from low-risk, supported jumping through to the full LIFTMOR protocol, building neuromuscular confidence, load tolerance, and bone mineral density at each stage (Watson et al., 2018).
Stage 1 — Supported Double-Leg Jumps (Weeks 1–3)
Goal: Establish safe landing mechanics, neuromuscular confidence, and baseline tolerance to impact
- Stand behind a sturdy support (kitchen counter, parallel bars, or squat rack uprights) with both hands lightly resting on the surface — use for balance only, not to offload body weight
- Perform vertical double-leg jumps, focusing on soft, controlled landing through toes → midfoot → heel
- Week 1: 3 sets × 6 repetitions, 3 days/week, 30–60 s rest between sets
- Week 2: 3 sets × 8 repetitions, 3 days/week
- Week 3: 3 sets × 10 repetitions, 3 days/week
- Progress to Stage 2 when the client demonstrates consistent, controlled landing mechanics and reports no joint pain or excessive soreness
Clinical note: Providing a support reduces fear of falling — a key barrier to high-impact exercise in this population (Hartley et al., 2020).
Stage 2 — Unsupported Double-Leg Jumps (Weeks 4–6)
Goal: Increase ground reaction force per landing without balance assistance
- Remove hand support; arms free to swing naturally to aid jump height and balance
- Maintain vertical double-leg jumps initially, progressing to encourage maximum effort and height
- Week 4: 3 sets × 8 repetitions, 3–4 days/week
- Week 5: 4 sets × 10 repetitions, 4 days/week
- Week 6: 4 sets × 10 repetitions, 4–5 days/week; begin introducing small anterior/posterior displacement on landing (step-jump pattern)
- Monitor for knee or ankle soreness; reduce frequency if needed
- Try to progressively increase jump height over time to continually increase osteogenic stimulus (Hartley et al., 2020)
Stage 3 — Skipping Rope (Jump Rope) (Weeks 7–14)
Goal: Introduce sustained rhythmic high-impact loading — proven to increase femoral neck BMD and improve bone turnover markers
- Weeks 7–8: 10 jumps/day, 3–5 days/week — use a light rope, low height
- Weeks 9–10: 20 jumps/day, 5 days/week; introduce short rest intervals (30 s) between sets of 10
- Weeks 11–12: 30 jumps/day, 5 days/week
- Weeks 13–14: Progress toward 50 jumps/day, 5 days/week as per the Basat et al. (2013) protocol
- If unable to skip continuously, perform in 2–3 sets with 30 s rest
- Footwear: supportive athletic shoes on firm surface (carpet or sprung gym floor)
Clinical note: Skipping rope generated sufficient mechanical loading to significantly improve both bone density and bone turnover markers in postmenopausal women with osteopenia at 6 months of supervised training (Basat et al., 2013).
Stage 4 — Unilateral Single-Leg Hops (Weeks 15–26)
Goal: Maximise per-leg ground reaction force for osteogenic stimulus at the femoral neck
- Begin with vertical hops on your preferred leg; use a support initially if required for balance — do not use support to aid propulsion (Hartley et al., 2020)
- Weeks 15–16: 3 sets × 6 hops, 3 days/week; vertical direction only; low hop height; arm support permitted
- Weeks 17–18: 3 sets × 8–10 hops, 3 days/week; moderate height; begin arm swing
- Weeks 19–20: 4 sets × 10 hops, 3–4 days/week; high effort; full arm swing
- Weeks 21–22: 5 sets × 10 hops, 4–5 days/week; introduce anterior/posterior (AP) hops
- Weeks 23–24: 5 sets × 10 hops, 5–6 days/week; add mediolateral (ML) hops
- Weeks 25–26: 5 sets × 10 hops (50 hops), daily; include rotational hops — full multiplanar protocol: Vertical → AP → ML → Rotational → Vertical (Hartley et al., 2020)
- Repeat on the contralateral leg in subsequent programme cycle.
Clinical note: Unilateral hopping generates ~72% of bilateral jumping ground reaction force (GRF) but applies the full force through a single limb, substantially increasing per-leg skeletal load — the key driver of femoral neck adaptation (Hartley et al., 2020).
Stage 5 — LIFTMOR Protocol: High-Intensity Resistance & Impact Training (Month 7 Onwards)
Goal: Maximise lumbar spine and femoral neck BMD through high-magnitude compound loading
Programme Parameters
- Frequency: 2 sessions/week
- Session duration: 30 minutes
- Supervision: Mandatory — small groups (maximum 8 per qualified supervisor); supervisor must be a physiotherapist or exercise scientist (Watson et al., 2018)
- Intensity: 80–85% of 1 repetition maximum (1RM) for resistance exercises
Month 1: Familiarisation Phase
- Body weight and low-load movement pattern training
- Focus on: squat, hinge (deadlift pattern), overhead press, and chin-up technique
- Participants should master all four fundamental movements before progressing to loaded work (Watson et al., 2018)
Months 2–8: Full LIFTMOR Protocol
Resistance Exercises (all performed as 5 sets × 5 repetitions @ 80–85% 1RM):
- Deadlift — 2 warm-up sets at 50–70% 1RM, then 5 working sets × 5 reps; targets lumbar spine and hip loading
- Back squat — compound lower limb and spinal loading; requires adequate hip/ankle mobility
- Overhead press — upper limb and spinal axial loading
Impact Exercise:
- Jumping chin-up with drop landing — grasp overhead bar with underhand grip, hands shoulder-width apart, elbows and shoulders flexed to 90°; jump as high as possible while simultaneously pulling up; at peak height, drop to the floor and land as heavily as comfortably possible (Watson et al., 2018)
Load Progression:
- Increase deadlift and squat loads by 2.5 kg increments when 5 repetitions are completed with correct form (Watson et al., 2018)
- Increase overhead press by 1–1.5 kg increments
- Maintain intensity at 80–85% 1RM throughout the programme; recalculate 1RM every 4 weeks
Safety Protocol
- Do not progress to this stage without baseline DXA, clinical clearance, and qualified supervision — the LIFTMOR protocol is not appropriate for unsupervised settings (Watson et al., 2018)
Clinical note: In the LIFTMOR trial, only 1 adverse event (minor lumbar muscle strain, resolving within 1 week) occurred across more than 2,600 training sessions. Compliance was 92%, and no fractures were sustained — even among participants with T-scores as low as −3.9 (Watson et al., 2018).
References
Basat, H., Esmaeilzadeh, S., & Eskiyurt, N. (2013). The effects of strengthening and high-impact exercises on bone metabolism and quality of life in postmenopausal women: A randomized controlled trial. Journal of Back and Musculoskeletal Rehabilitation, 26(4), 427–435. https://doi.org/10.3233/BMR-130402
Hartley, C., Folland, J. P., Kerslake, R., & Brooke-Wavell, K. (2020). High-impact exercise increased femoral neck bone density with no adverse effects on imaging markers of knee osteoarthritis in postmenopausal women. Journal of Bone and Mineral Research, 35(1), 53–63. https://doi.org/10.1002/jbmr.3867
Watson, S. L., Weeks, B. K., Weis, L. J., Harding, A. T., Horan, S. A., & Beck, B. R. (2018). High-intensity resistance and impact training improves bone mineral density and physical function in postmenopausal women with osteopenia and osteoporosis: The LIFTMOR randomized controlled trial. Journal of Bone and Mineral Research, 33(2), 211–220. https://doi.org/10.1002/jbmr.3284